AEM with MonsterFlow coolbox Install for NB

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.

AEM with MonsterFlow coolbox Install for NB

Postby Gecko » Mon Aug 02, 2010 12:02 pm

Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop near my work. They were not able to take it off either and suggested heating it, which I did not like.

What was a simple 30 minute install is now, a two day event. I was going to use a nut splitter to bust the nut and just replace it with a new one. Like to hear some suggestions.

thanks.
Last edited by Gecko on Sun Aug 08, 2010 7:38 pm, edited 1 time in total.
Gecko
 
Posts: 5
Joined: Sun Aug 01, 2010 7:41 pm

Re: AEM Install for NB

Postby Gecko » Wed Aug 04, 2010 1:03 pm

With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some effort to get it off.

Intake is now complete. Also, installed the MonsterFlow coolbox. As some online post suggest that it works with the AEM intake. Took a little finese but it worked.
Attachments
IMG_0706-1.JPG
AEM intake with MonsterFlow coolbox
IMG_0706-1.JPG (115.06 KiB)
Gecko
 
Posts: 5
Joined: Sun Aug 01, 2010 7:41 pm


Return to Installation Instructions

Who is online

Users browsing this forum: No registered users and 3 guests