Anyone else install the AEM short ram intake had trouble loosening the power steering pump nut? I am still not able to get it off and even took it to a shop near my work. They were not able to take it off either and suggested heating it, which I did not like.
What was a simple 30 minute install is now, a two day event. I was going to use a nut splitter to bust the nut and just replace it with a new one. Like to hear some suggestions.
thanks.
AEM with MonsterFlow coolbox Install for NB
AEM with MonsterFlow coolbox Install for NB
Last edited by Gecko on Sun Aug 08, 2010 7:38 pm, edited 1 time in total.
Re: AEM Install for NB
With Brian's help, I was able to get the nut off using some liquid wrench. Applied and let it sit for 4-6 hours, and used a vice grip wrench. Still took some effort to get it off.
Intake is now complete. Also, installed the MonsterFlow coolbox. As some online post suggest that it works with the AEM intake. Took a little finese but it worked.
Intake is now complete. Also, installed the MonsterFlow coolbox. As some online post suggest that it works with the AEM intake. Took a little finese but it worked.
- Attachments
-
- AEM intake with MonsterFlow coolbox
- IMG_0706-1.JPG (90.81 KiB) Viewed 4519 times