I.L. Motorsports Brace Install Instructions

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.

Re: I.L. Motorsports Brace Install Instructions

Postby sabatino » Mon Jun 23, 2014 7:13 pm

njaremka wrote:I removed those two braces on my install, and it seemed to go together just fine. When I was performing the install, the OEM braces appeared to be redundant with the install of the ILM brace.

Thanks for your experience, njaremka. :)
Drops my concern level a bit; I'll chalk it into the "removal was ok" column.

njaremka wrote:I also installed the rear diff brace, which further adds to that area.

Will see how it goes; I do not have the Rear PPF Bar with Differential Mounting:
http://www.ilmotorsportusa.com/Rear-PPF ... _p_99.html.
2013 MX5 GT PRHT AT | Copper Red
RoadsterSport: MAX Power Header BSCF, Mid & Super Q; Progress Springs; Koni Sport Adj; ILM RP Bar & X-Brace; Racing Beat F & R Tubular Sway Bars; 7x7.5 Enkei Tuning Fujin Black; Stebel Nautilus Horn
sabatino
 
Posts: 7
Joined: Sat Jun 15, 2013 11:45 am

Re: I.L. Motorsports Brace Install Instructions

Postby njaremka » Tue Jun 24, 2014 4:45 am

sabatino wrote:
njaremka wrote:I removed those two braces on my install, and it seemed to go together just fine. When I was performing the install, the OEM braces appeared to be redundant with the install of the ILM brace.

Thanks for your experience, njaremka. :)
Drops my concern level a bit; I'll chalk it into the "removal was ok" column.

njaremka wrote:I also installed the rear diff brace, which further adds to that area.

Will see how it goes; I do not have the Rear PPF Bar with Differential Mounting:
http://www.ilmotorsportusa.com/Rear-PPF ... _p_99.html.


mine doesn't have the PPF tab, just the bar that goes accross.
njaremka
 
Posts: 80
Joined: Fri Dec 17, 2010 10:31 am

Previous

Return to Installation Instructions

Who is online

Users browsing this forum: No registered users and 1 guest