I recently installed the new Super-Q coupled with a PPE LTH. I appreciate how the Super-Q tames the sound from LTH header, and they perfectly fit together: the two flat flanges match without any risk to bend applying wrong torque. They only need to be carefully aligned to avoid a step on the inside, because bolts are a bit smaller than flange holes and the two flanges can slide a bit on each other.
I notice that once everything is in place, the muffler right tip sticks out almost an inch more than left tip, in fact the whole muffler is slightly "rotated" toward that side and it is visible looking at rubber hangers too: the right ones are rotated backward a bit, while the left ones forward.
Since the muffler is firmly bolted to midpipe, there is not much I can do, I tried to push the muffler/hangers with hands on right side but I just can't move it.
Should I bend the steel hangers on the muffler, enough to have it aligned with rear bumper ? Not sure it would work tho, the midpipe connection will still hold muffler in the same orientation, and not an easy task I guess, steel hangers appear rather thick and not easy to bend especially without scratching the chrome finish...
It's just an aesthetic whim, not really an issue, so I could just leave it as is.