AZ Sun Lover wrote:Brian,
My apologies but I just skimmed through here and don’t know for sure but I’m guessing the front spring size is an 65mm x 8” spring for the Ohlin’s?
I found a used set I was thinking about purchasing. Now pushing 60 I think I would like to lower the front spring rate by 1 or 1.5kg... Then replacing the RX-8 Red & Yellow swaybar’s with an NC Blue & Green or with Red & Blue or Green swaybar’s.
Thanks in advance,
sam.bunger wrote:I just ordered a set for my NC. I know I've read tuning the settings is an art and takes practice but are there suggested setting starting points for road and track? I would like to have a good ride to the track and then adjust for when I am on the track.
ScottS734 wrote:I have installed a set of the Ohlin's and have issues with the front tires rubbing around T6 and T18 at CotA, they are right-hand turns and T18 has bumps. Also, I have lots of rubbing on a Harris Hill Road in San Marcus TX, which is a very bumpy track. I don't believe the shocks hit the bump stops before hitting the wheel wells. I have rubbed through the plastic liners and onto the metal in several areas.
The ride height is 13 3/4" in the rear and 13 1/2" in front which is 1/2" higher than recommended.
I will check the shock length which is supposed to be 335mm. Any other suggestions?
Users browsing this forum: No registered users and 2 guests