![Image](http://www.good-win-racing.com/mazda-talk/images/NC_2500cc.jpg)
NC Light
NC Light
Mentioned this in a few threads and figured you guys might want to see 2.5 liters in the NC. This is my new NC LIGHT project. Love our 2007 Supercharged NC but light weight it is NOT. And "Low Weight NC" has been something of an oxymoron. So, our dream here is 300hp and 2000 pounds....normally aspirated. I don't expect to get anywhere near 2000 pounds or the 300hp....that's aspirational and we will see how close we get. Motor choice is 2.5 liter (latest Mazda3 block). Just dropped it in today...still hanging from the cherry picker but you get the idea.
![Image](http://www.good-win-racing.com/mazda-talk/images/NC_2500cc.jpg)
![Image](http://www.good-win-racing.com/mazda-talk/images/NC_2500cc.jpg)
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 111
- Joined: Thu Sep 04, 2008 2:03 pm
- Location: Houston area
Yep, easily. We hope to get quite a bit beyond that mark...though I won't have any idea on the real numbers until we get on a dyno...hopefully within a few weeks. I picked up a dead 2.3 Formula Atlantic motor last Saturday for various parts that are getting used on this 2.5....hopefully including the F1 style roller throttle body! Currently cleaning the foam filter, etc....but will post shots once we get that on. Yes, that means we are going old school direct cable throttle...not that fly by wire crap~! ![Wink :wink:](./images/smilies/icon_wink.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: NC Light
Very interesting project. I'm sure a lot of us will be following your progress. One question, did you ever consider using a rotary(rx8) engine? I'm thinking that it would fit in nicely with your light weight theme.
06 GT GG, PSS10, Hotchkis, GWR exhaust, RPF1, AD08, IL braces, MS, dptune
91 A CR 5sp, Millen, FM, GAB, MOMO, Panasport, Naca, braced
91 A CR 5sp, Millen, FM, GAB, MOMO, Panasport, Naca, braced
Yes, thought about the RX8 motor seriously. Love the idea of 9000 rpms. Even had some light discussions with friends at Racing Beat about building a custom rotary. But, as previously mentioned, I want to skip the weight gains and complexity that come with boost...yet a normally aspirated RX8 motor does not make the torque we want on this one.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com