GWR Headers

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.

GWR Headers

Postby NC 2.0 IN OZ » Fri Jul 01, 2011 7:25 pm

Just had installed GWR Headers (onto stock mid-pipe and Roadster Q Muffler).

Thanks Brian, looks and sounds great. Headers arrived in West Coast Australia within a week of leaving CA. Great service all around.

The shop that installed left off 3 of the heat shields.
The shield that bolts onto the side bulkhead (shields the brake lines)..
Has anyone left this off or have they re-installed the shield?
Would it be OK to leave off or best to put back on?

Up-side is can see the Headers better with it off.

Thanks. John
NC 2.0 IN OZ
Posts: 9
Joined: Wed May 18, 2011 1:28 am

Re: GWR Headers

Postby Oz » Sat Jul 02, 2011 3:12 am

Don't know that I'd like almost the entire brake system including the booster sitting there with all that radiated heat.
I installed the shield just to be safe.

Pulled the baffles out of my Q actually sounds quieter!? and the bumometer thinks it goes harder too.
Rob Young
Black 2005 NCLE GWR Exh, Cosworth, Mototune, Ohlins, PF01
Posts: 39
Joined: Tue Aug 04, 2009 11:45 pm
Location: Sydney, Australia

Re: GWR Headers

Postby Brian » Sat Jul 02, 2011 8:42 am

Yes, put the shield back on that protects the brake lines.
Brian Goodwin
Good-Win Racing
Site Admin
Posts: 10011
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Return to Mazda Miata and Fiat 124

Who is online

Users browsing this forum: No registered users and 6 guests