JICs $600, Roll bar w/petty bar $600, IL Chassis kit, more..

Welcome to the Good-Win Racing Forum. Feel free to tell us who you are, leave any comments or suggestionson how we can serve you better
Post Reply
mann
Posts: 45
Joined: Sat Jun 10, 2006 7:54 am

JICs $600, Roll bar w/petty bar $600, IL Chassis kit, more..

Post by mann »

Turning it back into a street car, so this stuff is up for sale.

I have a used set of JICs, about 30k on them. One of the rear shocks leaked some fluid and the first inch of travel is not so hot. Further down it works fine and actually drove just fine (never noticed until taking it off) but a rebuild would get it back to 100%. The rest appear to be just fine.
Some external corrosion as you can see, but all adjusters are proper and not crossthreaded or stuck. These are the FLT-A2, but the bottom collars are the TAR spec ones and do not crossthread (unlike the old ones). JIC will rebuild these for $600 for the entire set, so for $1200 you would have a great set of coilovers ready for another 50k or however long you go between rebuilds. Or just fix the one for much less.
Includes the JIC shipping box, all required bushings, and the wrench to adjust them.

Also have a single hoop roll bar, excellent shape, includes the rear panel pieces that are already trimmed, and the petty bar. Has two bolts for harness mounting. $600
IL chassis brace kit, not perfect cosmetically (some surface scratches from rocks and driveway) but perfect structurally. Complete with front bar. - 450

OMP ARS seat, blue with side mounts - $500 (local only)

AWR seat brackets for race seats. $150

G-Force cam lock harness (blue, 6 pt). $120
Attachments
parts-2.jpg
parts-2.jpg (190.11 KiB) Viewed 3542 times
parts-1.jpg
parts-1.jpg (165.19 KiB) Viewed 3542 times
jic-7.jpg
jic-7.jpg (121.72 KiB) Viewed 3542 times
jic-3.jpg
jic-3.jpg (147.71 KiB) Viewed 3542 times
jic-1.jpg
jic-1.jpg (175.16 KiB) Viewed 3542 times
Last edited by mann on Wed Oct 12, 2011 6:17 am, edited 1 time in total.
06 turbo
mann
Posts: 45
Joined: Sat Jun 10, 2006 7:54 am

Re: JICs $600, Roll bar w/petty bar $600, IL Chassis kit, mo

Post by mann »

Additional pics below.
Attachments
parts-5.jpg
parts-5.jpg (182.65 KiB) Viewed 3541 times
parts-8.jpg
parts-8.jpg (129.67 KiB) Viewed 3541 times
parts-7.jpg
parts-7.jpg (186.06 KiB) Viewed 3541 times
06 turbo
jliu
Posts: 19
Joined: Thu May 05, 2011 8:41 am

Re: JICs $600, Roll bar w/petty bar $600, IL Chassis kit, mo

Post by jliu »

where are you located?
mann
Posts: 45
Joined: Sat Jun 10, 2006 7:54 am

Re: JICs $600, Roll bar w/petty bar $600, IL Chassis kit, mo

Post by mann »

Easton, PA.
06 turbo
jliu
Posts: 19
Joined: Thu May 05, 2011 8:41 am

Re: JICs $600, Roll bar w/petty bar $600, IL Chassis kit, mo

Post by jliu »

mann wrote:Easton, PA.
Can you email me your email address? Mine is jliuod@yahoo.com
iLovepEkPek
Posts: 3
Joined: Wed Nov 02, 2011 8:10 am

Re: JICs $600, Roll bar w/petty bar $600, IL Chassis kit, mo

Post by iLovepEkPek »

Are the IL braces still available? I am interested on the front lower bar, X-Brace and the rear brace. Are you stilling to separeate?
Post Reply