I'm busy rebuilding a 2.0l engine to put in my 1.8l MX5. The base engine I'm using is from a Mazda 6 which has the oil dip stick running down the outside of the engine. On the MX5 the dip stick goes through the head and straight down into the sump. I think I have worked out what modification I need to make to the head to make it work on the MX5 but would appriciate a photo from anybody who may have a cylinder head with the rocker cover off showing where the dip stick goes through the head.
Hope that makes sense,
Cheers, Mike
Cylinder Head Help - Photo Please
-
- Posts: 3
- Joined: Thu Aug 11, 2011 2:01 pm
Re: Cylinder Head Help - Photo Please
Somebody must have a cylinder head in bits, please - anybody
Re: Cylinder Head Help - Photo Please
Sorry, don't have any heads sitting around currently.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Cylinder Head Help - Photo Please
You might ask over at miata.net, since it's got more traffic.