Cylinder Head Help - Photo Please

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
mike n helen
Posts: 3
Joined: Thu Aug 11, 2011 2:01 pm

Cylinder Head Help - Photo Please

Post by mike n helen »

I'm busy rebuilding a 2.0l engine to put in my 1.8l MX5. The base engine I'm using is from a Mazda 6 which has the oil dip stick running down the outside of the engine. On the MX5 the dip stick goes through the head and straight down into the sump. I think I have worked out what modification I need to make to the head to make it work on the MX5 but would appriciate a photo from anybody who may have a cylinder head with the rocker cover off showing where the dip stick goes through the head.

Hope that makes sense,

Cheers, Mike
mike n helen
Posts: 3
Joined: Thu Aug 11, 2011 2:01 pm

Re: Cylinder Head Help - Photo Please

Post by mike n helen »

Somebody must have a cylinder head in bits, please - anybody :?:
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Cylinder Head Help - Photo Please

Post by Brian »

Sorry, don't have any heads sitting around currently.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
jboemler
Posts: 304
Joined: Fri Oct 10, 2008 6:15 pm
Location: Mukilteo WA

Re: Cylinder Head Help - Photo Please

Post by jboemler »

You might ask over at miata.net, since it's got more traffic.
Post Reply