2011 Miata headlight assembly removal
2011 Miata headlight assembly removal
How involved and difficult is it to remove the headlight assembly on a 2011 Miata?
Re: 2011 Miata headlight assembly removal
Take a closer look and you will see that the assembly unbolts and comes out easily.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: 2011 Miata headlight assembly removal
Brian
I think I see your point, however does the front fascia need to be removed as well.
Allen
I think I see your point, however does the front fascia need to be removed as well.
Allen
-
- Posts: 1
- Joined: Thu May 10, 2012 1:17 pm
Re: 2011 Miata headlight assembly removal
Hi afilo I am thinking of changing the h/lamp bulbs on my 2010 Miykao I have been told that you have to remove the inner wing panels to get access to the bulbs you will have to remove all the locking pins from the panel I woulkd consider replacing the main / dip and side light bulbs rather than just one bulb given the lenght of time and all the profanities you will use.
Alan (Blackpool UK)
Alan (Blackpool UK)
Re: 2011 Miata headlight assembly removal
Yes, the front bumper cover needs to come off, then as Brian notes, it's easy.
Ron
Ron
Re: 2011 Miata headlight assembly removal
Thanks Brian and Ron, that's exactly what I thought, and as long as the front bumper cover is off, I will install a new air intake system as well. This site rocks.
Re: 2011 Miata headlight assembly removal
Out of curiousity, why are you pulling out the headlights?
Ron
Ron
-
- Posts: 48
- Joined: Mon May 14, 2012 11:42 am
Re: 2011 Miata headlight assembly removal
probably to change the bulbs!ronbauer wrote:Out of curiousity, why are you pulling out the headlights?