Okay, latest project! We are working with Swift Springs on some serious performance springs for the NC. If you don't know Swift Springs, read around a bit, they are TOP quality ultra high performance springs, lighter yet more consistent in rate than competitors. We typically use their metric coilover springs in our race cars as upgraded springs in our Ohlins Racing coilovers....but they also can make standard lowering springs and we are working with them on an NC set of springs that will be quite a bit higher rate than our Progress/Eibach/Racing Beat springs yet less than what we typically use in coilovers.
I currently need a set of PRHT NC1 springs (2006-2008). Does anybody have some they can donate to the cause? I already have our stock NC1 softtop springs and our stock 2012 PRHT springs in the project. Thanks in advance.
Swift PERFORMANCE Springs....for NC!
Swift PERFORMANCE Springs....for NC!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Swift PERFORMANCE Springs....for NC!
Maybe we could negotiate a swap?
Unfortunately, I am kinda attached to mine at the moment.![Wink :wink:](./images/smilies/icon_wink.gif)
Unfortunately, I am kinda attached to mine at the moment.
![Wink :wink:](./images/smilies/icon_wink.gif)
Re: Swift PERFORMANCE Springs....for NC!
I have an un-used set from my 2007 PRHT. I will get them back eventually, correct? Send me an email at mmetoyer at gmail.com with your UPS shipping account and I can box them up and ship them from central California.
Matthew Metoyer
2010 Grey MX-5 GT, Manual, Sport Package, Street Single w/Baffle, FCM Coilovers - "GT" setup with KBO & Ripple Reducer, 16x8 wheels, Budget Big Brakes, Goodwin Underbody Braces, Cravenspeed Shift Knob
2010 Grey MX-5 GT, Manual, Sport Package, Street Single w/Baffle, FCM Coilovers - "GT" setup with KBO & Ripple Reducer, 16x8 wheels, Budget Big Brakes, Goodwin Underbody Braces, Cravenspeed Shift Knob
Re: Swift PERFORMANCE Springs....for NC!
Not sure if you also need NC2 soft top springs to compare all the variations, but I have a set from my 2012 Touring soft top (with suspension package, if that matters) if you want to compare those as well. They're all-but-new with about 6 months and 4000 miles on them.
Good to hear that there will be another fairly high rate option other than the FM springs.
If you haven't already decided on spring rates, 300F/250R might be a reasonable starting point. It's in the same ballpark as FM springs, but has a better F/R bounce frequency ratio, according to FCM's on-line suspension calculator. And it works well with your popular swaybar options. It would be too stiff for OEM shocks, but Konis should be able to handle those rates with no problems.
Good to hear that there will be another fairly high rate option other than the FM springs.
If you haven't already decided on spring rates, 300F/250R might be a reasonable starting point. It's in the same ballpark as FM springs, but has a better F/R bounce frequency ratio, according to FCM's on-line suspension calculator. And it works well with your popular swaybar options. It would be too stiff for OEM shocks, but Konis should be able to handle those rates with no problems.
Last edited by Chuck H on Wed Mar 06, 2013 6:55 am, edited 1 time in total.
2019 Arctic White RF GT-S
SmartTop, coilovers
SmartTop, coilovers
Re: Swift PERFORMANCE Springs....for NC!
looking forward to seeing the outcome with these ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: Swift PERFORMANCE Springs....for NC!
The Spring rates question is a great question. I have been thinking everything from about 200 front for more mass appeal to something like that 300/250 you mention above. Any other thoughts on the rates?
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Swift PERFORMANCE Springs....for NC!
I posted over on miata.net and it seems to be generating a bit of buzz.
http://forum.miata.net/vb/showthread.php?t=492353
I thought this was some good input:
I don't think 300/250 is too much spring, assuming that you've got the right shocks. It's softer than the 390/280 Ohlins setup that's always praised as riding better than stock. And it's about on par with the FM springs, which I've never seen a review that said that the springs were too stiff.
Not sure that something like 200/170 is stiff enough. I suspect that the OEM and Mazdaspeed/Eibach springs end up getting almost that stiff by the time you compress them down to normal ride height. It would give people a nice range of options if these Swift springs with Konis end up being about halfway between a Progress/Koni setup and a Tein Flex setup.
http://forum.miata.net/vb/showthread.php?t=492353
I thought this was some good input:
The only tricky part about the ride height is whether you're targeting 13" on Konis or on Tokico HTS or Bilstein Sport.angelos wrote:This is really good news for those who don't want to fit coilovers due to cost. Swift springs are definitely well regarded.
IMO, rates should target FM rates (my preferred non-coilover spring rate) but go one better by designing for a drop to 13", which is a ride height that works well real world (sufficient ground clearance for most any paved situation) and actually gives nice even wheel well gap around the tire as well.
I don't think 300/250 is too much spring, assuming that you've got the right shocks. It's softer than the 390/280 Ohlins setup that's always praised as riding better than stock. And it's about on par with the FM springs, which I've never seen a review that said that the springs were too stiff.
Not sure that something like 200/170 is stiff enough. I suspect that the OEM and Mazdaspeed/Eibach springs end up getting almost that stiff by the time you compress them down to normal ride height. It would give people a nice range of options if these Swift springs with Konis end up being about halfway between a Progress/Koni setup and a Tein Flex setup.
Last edited by Chuck H on Wed Mar 06, 2013 10:56 am, edited 1 time in total.
2019 Arctic White RF GT-S
SmartTop, coilovers
SmartTop, coilovers
Re: Swift PERFORMANCE Springs....for NC!
Hi Mattmatthew-m wrote:I have an un-used set from my 2007 PRHT. I will get them back eventually, correct? Send me an email at mmetoyer at gmail.com with your UPS shipping account and I can box them up and ship them from central California.
Yes, we will get them back to you. Only need one front and one rear to measure them up. Will send you an email and thanks for your help!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Swift PERFORMANCE Springs....for NC!
For comparison, my FCM coil-overs are currently at 300/224, and I have the car height at roughly 13.5" after corner balancing. The car is my daily driver, so I wasn't willing to go with higher spring rates. I love the way it corners - much easier to rotate with the throttle, and very neutral front to rear. I do have issues with over steer on slick pavement, and there is a tendency to oscillate front to rear on the freeway over the expansion joints. One of these days I will get around to trying 250 or 280 pound rear springs to adjust the oscillation, as discussed with FCM.Chuck H wrote:I posted over on miata.net and it seems to be generating a bit of buzz.
http://forum.miata.net/vb/showthread.php?t=492353
I thought this was some good input:The only tricky part about the ride height is whether you're targeting 13" on Konis or on Tokico HTS or Bilstein Sport.angelos wrote:This is really good news for those who don't want to fit coilovers due to cost. Swift springs are definitely well regarded.
IMO, rates should target FM rates (my preferred non-coilover spring rate) but go one better by designing for a drop to 13", which is a ride height that works well real world (sufficient ground clearance for most any paved situation) and actually gives nice even wheel well gap around the tire as well.
I don't think 300/250 is too much spring, assuming that you've got the right shocks. It's softer than the 390/280 Ohlins setup that's always praised as riding better than stock. And it's about on par with the FM springs, which I've never seen a review that said that the springs were too stiff.
Not sure that something like 200/170 is stiff enough. I suspect that the OEM and Mazdaspeed/Eibach springs end up getting almost that stiff by the time you compress them down to normal ride height. It would give people a nice range of options if these Swift springs with Konis end up being about halfway between a Progress/Koni setup and a Tein Flex setup.
Matthew Metoyer
2010 Grey MX-5 GT, Manual, Sport Package, Street Single w/Baffle, FCM Coilovers - "GT" setup with KBO & Ripple Reducer, 16x8 wheels, Budget Big Brakes, Goodwin Underbody Braces, Cravenspeed Shift Knob
2010 Grey MX-5 GT, Manual, Sport Package, Street Single w/Baffle, FCM Coilovers - "GT" setup with KBO & Ripple Reducer, 16x8 wheels, Budget Big Brakes, Goodwin Underbody Braces, Cravenspeed Shift Knob
Re: Swift PERFORMANCE Springs....for NC!
And this is why I haven't pulled the trigger on Progress springs just yet! I really like the idea of PRHT springs with a stiffer rate matched with Koni shocks, standing about 13" ride height for a combined price under $1,000. The next best thing are some of the bargain coilovers @ $1,400, which really only offer height adjustability for corner weighting (mostly unnecessary in a street car).