Re: Our Next TECH DAY--SUNDAY JUNE 28th

Welcome to the Good-Win Racing Forum. Feel free to tell us who you are, leave any comments or suggestionson how we can serve you better
eluviis
Posts: 65
Joined: Sat Mar 24, 2012 8:16 pm
Location: San Diego

Re: Our Next TECH DAY--THIS SATURDAY!

Post by eluviis »

Oh neat. I had plans to detail my truck on Saturday... But...

Long story short. Last month I bought a '95 NA. So now I have the NC and NA. There are some things I want to do the the NA... they mainly start with stiffening it up as it feels a bit like a noodle compared to the NC.

The car is in excellent condition, wait 'til you see it. But at some point it it's life, the original owner high-sided it and bent the driver's side frame rail. So the first thing I want to do to the car is add something like this:

http://www.good-win-racing.com/Mazda-Pe ... 00604.html

Do you have those in stock Brian? Do you think I can get lift time to install those? I thought about pulling the bit that's bent before installing these, but I might not need to. I think these can just be bolted in regardless, even if that one bent part would not allow a bolt.

If you have other chassis stiffening components you recommend as a whole, please let me know. We can also discuss more of it there.

Essentially, before power mods and all that, I want to get rid of every flex, squeak and rattle throughout the entire car. I do have on power mod that will also equate to a rattle-mod. The stock header's heat shield - the part that's on the bottom right before the cat, rattles like crazy. I could take off the heat shield and add an aftermarket, non-rattling one, but I could also consider a new header altogether.

I'll eventually need other chassis reinforcement components, including a roll bar. Another thing I want to do is replace all the bushings, but we can do that at a later time.

-Danny
My car: The 1995 RallyWays Miata
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

Hi Danny

BossFrog ships those Frame Rail kits direct to our customers, we don't keep them here. Ric at BossFrog says it could be here by Friday for $54 ship cost. Rocky is the man to talk to about lift time, if interested in getting those going, email me and I will pass that to him to get you started on setting reserved lift time.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
eluviis
Posts: 65
Joined: Sat Mar 24, 2012 8:16 pm
Location: San Diego

Re: Our Next TECH DAY--THIS SATURDAY!

Post by eluviis »

Hi Brian, nah, I don't want to pay $54 for shipping. Those are what seem like an easy install and I can do it in my garage, later on, no problem.

I'll wait on that for a bit because I'm considering a Boss Frog bar, and if I do go with that one I'll order both at once, slow shipping.

I'll shop around for a bit on your site and see what else I might like. Thanks.
My car: The 1995 RallyWays Miata
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

Please join us for our tech day this Saturday June 15th from 8-3ish.

Come talk shop, check out new products, work on your car and have some lunch with us.

Our Shop address is 2951 Garnet Ave San Diego, CA 92109.

Let me know if you have any questions. Hope to see you there!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

Great day! Thanks to all who shared the fun day.
Attachments
techday5.JPG
techday5.JPG (141.45 KiB) Viewed 16054 times
techday4.JPG
techday4.JPG (173.4 KiB) Viewed 16054 times
techday3.JPG
techday3.JPG (134.86 KiB) Viewed 16054 times
techday2.JPG
techday2.JPG (159.23 KiB) Viewed 16054 times
techday1.JPG
techday1.JPG (148.93 KiB) Viewed 16054 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

Guests with two legs and four...
Attachments
Goodwin Tech Day 2.jpg
Goodwin Tech Day 2.jpg (50.78 KiB) Viewed 15914 times
Goodwin Tech Day 1.jpg
Goodwin Tech Day 1.jpg (49.5 KiB) Viewed 15914 times
techday6.JPG
techday6.JPG (151.89 KiB) Viewed 15947 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

Our Next Tech Day is Saturday October 12th at our San Diego Shop!!! 2951 Garnet Ave 92109

Come join us and spend the day talking Miata, enjoy some BBQ and hang out. Starts at 8am and usually winds down around 2pm.

If you want to use a lift email us BEFORE the event. Or call Rocky direct at (858) 273-2547 to schedule time.

Hope to see you there!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

Thanks to all who joined the fun and made the Tech Day a fun day for all.
Attachments
TechDay6.JPG
TechDay6.JPG (102.21 KiB) Viewed 14615 times
TechDay2.JPG
TechDay2.JPG (102.37 KiB) Viewed 14615 times
Tech-Day3.jpg
Tech-Day3.jpg (74.41 KiB) Viewed 14615 times
Tech-day1.jpg
Tech-day1.jpg (113.96 KiB) Viewed 14615 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

More Tech Day Pics
Attachments
TECHday9.JPG
TECHday9.JPG (113.53 KiB) Viewed 14615 times
TECHday8.JPG
TECHday8.JPG (118.85 KiB) Viewed 14615 times
TechDay7.JPG
TechDay7.JPG (110.78 KiB) Viewed 14615 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Our Next TECH DAY--THIS SATURDAY!

Post by Brian »

Customer Carl Lewis get the award for most done on our lifts today, Fender Roll, Full Tein Street Flex Coilover install and Enkei SBC Finish 17x9 with 255/40 Rival tires....all ready for next STR event.
Attachments
TECHDAY4.JPG
TECHDAY4.JPG (126.45 KiB) Viewed 14615 times
Black-MX5-STR4.jpg
Black-MX5-STR4.jpg (99.67 KiB) Viewed 14615 times
Black-MX5-STR3.jpg
Black-MX5-STR3.jpg (118.55 KiB) Viewed 14615 times
Black-MX5-STR2.jpg
Black-MX5-STR2.jpg (117.99 KiB) Viewed 14615 times
Black-MX5-STR1.jpg
Black-MX5-STR1.jpg (164.5 KiB) Viewed 14615 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply