Another new addition to our shop here, these are the same rotors used by MX-5s racing in the IMSA Continental Tire Sports Car Challenge.
These come as a pair of rotors and hats, fully assembled with all hardware, ready to bolt on.
These motorsports-grade, 2-piece floating rotors are direct replacements for the standard 2006-2015 MX-5 rotors, and work with the OE calipers.
2-piece floating rotors are dramatically superior to cheaper one-piece rotors for performance/track use. As the rotor temperature increases, a one-piece rotor will warp and migrate laterally - sometimes as much as a quarter inch one way or the other. 2-piece floating rotors stay centered even under extreme conditions, reducing brake drag and keeping the brakes operating properly and at lower temperature.
PFC Championship-winning race rotors feature benefits such as:
*Lightest Design
*Longest-Lasting
*More Stopping Power
*Most Consistent
*Best Cooling
*Reduced Distortion
*FEA Designed Thermal Capacity
*High Carbon Alloy with Molybdenum and Copper
*Extensive FEA Analysis
Performance Friction rotors are "dimpled" rather than slotted. Note that they are NOT cross-drilled:
Performance Friction Floating Rotors for your NC
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: Performance Friction Floating Rotors for your NC
Do these offer a weight savings versus standard one-piece rotors?
Matthew Metoyer
2010 Grey MX-5 GT, Manual, Sport Package, Street Single w/Baffle, FCM Coilovers - "GT" setup with KBO & Ripple Reducer, 16x8 wheels, Budget Big Brakes, Goodwin Underbody Braces, Cravenspeed Shift Knob
2010 Grey MX-5 GT, Manual, Sport Package, Street Single w/Baffle, FCM Coilovers - "GT" setup with KBO & Ripple Reducer, 16x8 wheels, Budget Big Brakes, Goodwin Underbody Braces, Cravenspeed Shift Knob
-
- Posts: 112
- Joined: Thu Feb 23, 2012 9:42 pm
Re: Performance Friction Floating Rotors for your NC
Sorry Ryan, but I don't see these in your store.
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: Performance Friction Floating Rotors for your NC
Just added to the store so they took a little while to show up. Here's a direct link:
http://www.good-win-racing.com/Mazda-Pe ... -1604.html
http://www.good-win-racing.com/Mazda-Pe ... -1604.html
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: Performance Friction Floating Rotors for your NC
About 1.5 lb saved per corner.matthew-m wrote:Do these offer a weight savings versus standard one-piece rotors?