Koni

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
Apexcone
Posts: 26
Joined: Sun Jun 14, 2015 4:36 pm
Location: Red Deer, Alberta
Contact:

Koni

Post by Apexcone »

Morning Brian

How much difference does running the Koni's full hard front & rear make and what characteristics does it introduce to the car ?

Thanks

Terry
Terry

"I know you're cheating because I am and you're beating me"
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Koni

Post by Brian »

Koni for NC lowers the car about half an inch compared with stock shocks, which is side effect of change from monotubes to twin tube and lower pressure design of the Koni.

You can adjust the Koni from soft to hard and that gives you more control over both ride...and balance of the car. So, during autocross event if you want the back end to rotate better you dial the rear stiffer and the front softer, etc.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply