Budget Street/Autocross/Track 2.5 NC Project!

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
dynotronics1
Posts: 3
Joined: Sat Feb 13, 2010 7:26 am
Contact:

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by dynotronics1 »

like HP, you can NEVER have too much cooling on these cars. the 3 pass is a really nice set up we have used on several really high output turbo 2.5 builds, and it, in addition to a decent oil cooler set up, is a really good foundation to any quality build, IMO
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by Brian »

dynotronics1 wrote:like HP, you can NEVER have too much cooling on these cars. the 3 pass is a really nice set up we have used on several really high output turbo 2.5 builds, and it, in addition to a decent oil cooler set up, is a really good foundation to any quality build, IMO

Ditto what Joe says, cooling is foundation work, not a place to save, it is a place to kill a good motor too easily in these cars, which we have done and don't wish to repeat.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
MitchC635
Posts: 42
Joined: Sun Feb 25, 2018 10:06 pm

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by MitchC635 »

Concur that the GWR triple pass is a really nice piece, and would definitely choose it for high power builds or when future power increases are planned. However, for this budget build, the radiator cost more than the motor did.

The CSF #7015 is also a nice piece with the same core size, thickness and B tube technology as the triple pass, and it seems to have proven itself in moderate HP racing conditions. At near half the price of the triple pass, it appears to be a better value for a 200ish HP budget build NC. Do you really only recommend the CSF #7015 for non-racing applications?
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by Brian »

It's not the cost of the motor I worry about, it's the 15 hours of hard work to swap it. As noted, compromised ring tension and lost horsepower on really good 2.5 motor on very hot August SCCA day in 'Project Blue,' which was our first dual purpose 2.5 project. Think we had the KOYO in that project at the time, similar to standard CSF and certainly enough for any 2.0 normally aspirated use as it was designed, and any street normally aspirated use of 2.5, but autocross/track is a lot of extra stress and we have failed on that stress test once before, part of what motivated the development of the CSF triple pass. Rather than learn the lessons of that history again on this project, we do it right on cooling from the start so we don't need to swap the motor yet again.

And now that we already did the original budget purpose of showing up and beating everything with doors with junkyard motor NC, we look ahead to what is next and that might include new boost kit this Summer.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
MitchC635
Posts: 42
Joined: Sun Feb 25, 2018 10:06 pm

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by MitchC635 »

Thanks for the clarification, and helping us learn from your hard earned experience. Looking forward to seeing what's next on this project
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by Brian »

Dyno Today for this Project!

Results Later Today!
Attachments
0223190727_HDR.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by Brian »

Final BEST....196 HP.

Tomorrow will post the sheet showing best with 2.0 and this result.
Attachments
DynoProjectNC91.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
DavidW002
Posts: 1
Joined: Sun Mar 18, 2012 6:12 pm

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by DavidW002 »

I've missed something along the way. Why the RX8 front hugs? Thanks!
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by Brian »

DavidW002 wrote:I've missed something along the way. Why the RX8 front hugs? Thanks!
RX8 hubs for those running hard on 17x9 or 17x10 wheels like we do, the stock front MX5 hubs fail under the stress eventually so we just got ahead of that on this project (we didn't wait for them to die, we have killed enough of them on prior projects and getting only halfway through a track day weekend when it happens is something I prefer to avoid).
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Budget Street/Autocross/Track 2.5 NC Project!

Post by Brian »

Comparison with the 2.0 in the motor previously. The 2.0 had exhaust system, but no cams, no intake. Up 40 hp, about 50 ft/lbs torque! Feels good... :mrgreen:
Attachments
CompareDynoSmall.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply