So I met Ryan at PRI and we are doing some things together so I thought I'd start a thread for my project. It is a NB with a MZR motor, Quaife sequential trans and some home brew suspension bits along with a bunch of stuff from Goodwin. Will try to get some pics up here soon. In the meantime here is a NC cage I'm working on.
https://photos.app.goo.gl/TB778PxCQMBiuDY18
My MZR powered NB race car
Re: My MZR powered NB race car
So I started this thread will all the best intentions but have been plugging away and not posting. Here's a bit of catch up.
This was aligning the trans/motor/rear with my new laser tool. Amazing how important this is a 8k+ RPM
motor installed for the second time... First one the motor was to far back and low. Would have been illegal for STU
Side exhaust to make room for other stuff and the fact that a 3" pipe wont fit through the rear subframe.
Floor mounted Tilton pedal box
Motor in with drysump mounted and -12 lines run. What a joy -12 lines are to make!
Oil tank and fire system.
This was aligning the trans/motor/rear with my new laser tool. Amazing how important this is a 8k+ RPM
motor installed for the second time... First one the motor was to far back and low. Would have been illegal for STU
Side exhaust to make room for other stuff and the fact that a 3" pipe wont fit through the rear subframe.
Floor mounted Tilton pedal box
Motor in with drysump mounted and -12 lines run. What a joy -12 lines are to make!
Oil tank and fire system.
Last edited by BERG on Tue Jul 30, 2019 8:17 am, edited 1 time in total.
Re: My MZR powered NB race car
Love this project, long live the MZR!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: My MZR powered NB race car
Hi Brian how do I get the pics to show in the tread?
Re: My MZR powered NB race car
You can upload them here with 'upload attachment' function. Normally can also link them in with "Img" button but I just tried it and cannot seem to make that work from the location they are stored, might be some copyright protection scheme they have with that storage.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: My MZR powered NB race car
So I figured out how to upload the pics. More coming soon.
Re: My MZR powered NB race car
Stopteck brakes with Goodwin ducts
Modeling the header with ICEngine works kit
Finished header and cooling system
New hubs from Wilwood
Cooling pipe from the back of the head and expansion tank. Need to decide if the line from the tank should go into the rad or into the back of the head. Vent goes to the bung on the pipe.
Modeling the header with ICEngine works kit
Finished header and cooling system
New hubs from Wilwood
Cooling pipe from the back of the head and expansion tank. Need to decide if the line from the tank should go into the rad or into the back of the head. Vent goes to the bung on the pipe.
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: My MZR powered NB race car
Things are coming along! Header looks great. If you have a pic of the interlocking header template system you showed me, gotta post that too, very cool stuff.
Half the pics are working. That's also progress!
Looking forward to seeing an MZR NB making some people really scratch their heads.
Half the pics are working. That's also progress!
Looking forward to seeing an MZR NB making some people really scratch their heads.
Re: My MZR powered NB race car
Ryan,
Are you not seeing the pics? I am? Anyway thanks and things are moving a bit now. Need to test soon and time is short.
Are you not seeing the pics? I am? Anyway thanks and things are moving a bit now. Need to test soon and time is short.
Re: My MZR powered NB race car
I'm only getting the bottom half of the pictures also.