PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Freescopesdad
Posts: 112
Joined: Thu Feb 23, 2012 9:42 pm

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Freescopesdad »

Brian, where is the big knob you showed in your January 10, 2020 post? Will you offer it soon and in different colors?
Ron Petrich
http://www.sacramentoareamiata.org
2016 ND GT 6MT|ZII/NT01|Ohlins|Progress|OFT|HDDDM4
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Brian »

Freescopesdad wrote:Brian, where is the big knob you showed in your January 10, 2020 post? Will you offer it soon and in different colors?
First batch is in production, we expect to be shipping that in April. First batch is just two colors, RED and BLACK.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Freescopesdad
Posts: 112
Joined: Thu Feb 23, 2012 9:42 pm

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Freescopesdad »

perfect... 8)
Ron Petrich
http://www.sacramentoareamiata.org
2016 ND GT 6MT|ZII/NT01|Ohlins|Progress|OFT|HDDDM4
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Brian »

Bryan at NGEN reports our RoadsterSport Brace setup does fit Automatic transmission. But it is CLOSE, like quarter of an inch, might need some fender washers in there for more clearance. Bryan is going to report back of transmission taps the braces.
Attachments
FiatAutoTrans.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Brian »

Konig Freeform 17x8 with 225/45 Continental ECS on our Fiat 124...and Mr. Happy Puppy.
Attachments
HappyFiat.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Freescopesdad
Posts: 112
Joined: Thu Feb 23, 2012 9:42 pm

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Freescopesdad »

Any word on the BIG knob... :shock:
Ron Petrich
http://www.sacramentoareamiata.org
2016 ND GT 6MT|ZII/NT01|Ohlins|Progress|OFT|HDDDM4
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Brian »

Freescopesdad wrote:Any word on the BIG knob... :shock:

YES...started shipping just a few days ago.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Brian »

Our Fiat on the lift today for some configuration changes and looking into starting radiator upgrade project!

Yes, today was RED ONLY DAY on our lifts... :wink:
Attachments
FiatLift.jpg
OilCool2.jpg
CoolingOil.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
BillK336
Posts: 54
Joined: Sat Oct 03, 2015 1:31 am

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by BillK336 »

Interesting. is the NACA intake stock?
2020 JBM Sport MT, GWR RaceTT, Conti DWS, Cobalt FSTB, Voodoo, Cravenspeed, and mx5things bits…
RIP '16 MG Club GWR, Race TT, Versatune, RS Springs & Konis, Conti ECS, TRM FF10, AA & AIO, etc...
'97's SOLD...
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Post by Brian »

BillK336 wrote:Interesting. is the NACA intake stock?
Yes, cute little NACA is stock.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply