Maverick the Shop Truck!

Welcome to the Good-Win Racing Forum. Feel free to tell us who you are, leave any comments or suggestionson how we can serve you better
Brian
Site Admin
Posts: 10682
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Maverick the Shop Truck!

Post by Brian »

ReadyRamp on the Maverick.

Been impressed with the flexibility of the Maverick bed. Ford calls it 'Flexbed' and part of that is you can set the tailgate at different heights. Thanks to the unibody construction the modest 54 inch bed is flat and almost without wheel arches. Molded into the side of the bed are slots where you can use your own DIY dividers cut from standard bits of lumber. Also, lots of tie downs top and bottom in the bed.

Maverick's bed is wide enough to accommodate a 4x8 sheet of plywood. The tailgate can be locked at 45°, at which angle its height aligns with the aforementioned supports to keep your plywood flat. In this position, the tailgate can support up to 400 pounds. If you need length the load floor extends to 6’ with the tailgate fully extended.
Attachments
2022-Ford-Maverick-FLEXBED-Graphic1.jpg
2022-Ford-Maverick-FLEXBED-Graphic1.jpg (60.09 KiB) Viewed 277 times
Ford-Maverick_2L-EcoBoost-AWD_Lariat_12.jpg
Ford-Maverick_2L-EcoBoost-AWD_Lariat_12.jpg (91.05 KiB) Viewed 279 times
MavRR.jpg
MavRR.jpg (1.25 MiB) Viewed 280 times
ReadyRampMav.jpg
ReadyRampMav.jpg (1.28 MiB) Viewed 280 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 10682
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Maverick the Shop Truck!

Post by Brian »

More Small Truck Doing Truck Jobs!
Mav1.jpeg
Mav1.jpeg (615.64 KiB) Viewed 228 times
Friends had their fridge stocked for the holiday and the compressor failed and all the appliance stores in town told them delivery would be at least a week. Little Maverick to the rescue. Continuing to use this little truck daily for most errands, it's just so easy with the really low bed height. Tow ratcheting straps to hold it and 20 miles down the freeway we went with zero issues. I used a gym mat and some old ramps to make my loading and unloading easier.
maverick lowering fridge.jpg
maverick lowering fridge.jpg (430.11 KiB) Viewed 205 times
MavFridge3.jpg
MavFridge3.jpg (420.04 KiB) Viewed 202 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 10682
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Maverick the Shop Truck!

Post by Brian »

Sunrise Surf with 7'6 board.
Attachments
SunriseMaverick.jpg
SunriseMaverick.jpg (965.04 KiB) Viewed 195 times
SunriseMav2.jpg
SunriseMav2.jpg (946.64 KiB) Viewed 195 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 10682
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Maverick the Shop Truck!

Post by Brian »

Still having fun with the Mav!
Attachments
MavAngleFun.jpg
MavAngleFun.jpg (2.15 MiB) Viewed 103 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply