Congrats to customer Vivek Goel for winning CS at Nationals for 2022. Even more impressive is the car is all the basics, no exotic double adjustables, all the same bits we run on our ND, very simple:
Karcepts front sway bar
Off the shelf koni single adjustable shocks
OEM front bumpstops, cut down about 1/2"
The blue rear bumpstops that we sell
Yokohama A052 tires
Max front camber at -1.8, rear camber -1.4
Zero toe all around
Front bar set at position 2 on both sides
Rear shocks 100% stiff
Front shocks 70% stiff
PROJECT ND: Parts Development, Testing, Measurements, DYNO
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
On the alignment rack. Didn't get all of what we wanted, but pretty good:
Front Camber -1.75 Right and left
Front TOE Zero. Always have done toe out for 30 years, but recently been trying toe zero because so many are doing that on ND and so far I like it so we stay with that for now.
Caster 6. This is about reducing scrub of the tire on fender liner, we stuff 225/45/17 tires in the fenders for CS.
Rear Camber -1.5 Right and Left
Toe Zero.
Front Camber -1.75 Right and left
Front TOE Zero. Always have done toe out for 30 years, but recently been trying toe zero because so many are doing that on ND and so far I like it so we stay with that for now.
Caster 6. This is about reducing scrub of the tire on fender liner, we stuff 225/45/17 tires in the fenders for CS.
Rear Camber -1.5 Right and Left
Toe Zero.
- Attachments
-
- alignment.jpg (1.37 MiB) Viewed 6040 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Customer Before/After shots with our RF Springs and KONI Sport Shocks
- Attachments
-
- BeforeAfter2.jpg (604.28 KiB) Viewed 5929 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Customer Before and After with our Progress Springs on OEM Bilstein Shocks
- Attachments
-
- Before-AfterRF.jpg (305.42 KiB) Viewed 5929 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
More global cup car pics showing our CarbonMiata Grilles in track use.
- Attachments
-
- Grille2Global1.jpg (265.07 KiB) Viewed 5911 times
-
- GrilleGlobals.jpg (410.32 KiB) Viewed 5911 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Ok so FAB9 says the HKS is worked out for ND2 on their website. Nothing about it being CARB legal yet. Any chance you’ll be looking further into this, Brian? I’d happily buy it from you guys to keep your business going after you’ve done some in-house testing or at least if you’ve vetted it from FAB9.
Sean
2019 GT RF
Machine Grey
RoadsterSport Suspension Package/RoadsterSport SuperStreet Single-tip exhaust.
2019 GT RF
Machine Grey
RoadsterSport Suspension Package/RoadsterSport SuperStreet Single-tip exhaust.
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
WE are in California, deep in CARB land. And Fab9 is really too small to bother with CARB certification, which is very expensive to do. Thus, unless HKS decides to bankroll the CARB effort we will be sitting on the sidelines for now, though I would love to see it get CARB.SeanM476 wrote: ↑Sun Oct 30, 2022 8:45 pmOk so FAB9 says the HKS is worked out for ND2 on their website. Nothing about it being CARB legal yet. Any chance you’ll be looking further into this, Brian? I’d happily buy it from you guys to keep your business going after you’ve done some in-house testing or at least if you’ve vetted it from FAB9.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
There is a thread on the connection issues on the HPDE facebook group. Here are some photos of the locations and examples of zip tying needed to prevent issue in high track use.
- Attachments
-
- c4.jpg (51.59 KiB) Viewed 5840 times
-
- c3.jpg (130.82 KiB) Viewed 5840 times
-
- c2.jpg (77.47 KiB) Viewed 5840 times
-
- c1.jpg (76.66 KiB) Viewed 5840 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Great fun to get out again with the BMW Club! Lots of old friends and car crazy enthusiasts slipping and sliding cars around the course.
Covid meant no events for about two years and loss of Qualcomm Stadium location to redevelopment extended the down time. Our 2019 still likes to be at the pointy end of the field (this is their class for Instructors, 'G' for Gold Class). Just barely nipped buddy Chris in the Vette.
Covid meant no events for about two years and loss of Qualcomm Stadium location to redevelopment extended the down time. Our 2019 still likes to be at the pointy end of the field (this is their class for Instructors, 'G' for Gold Class). Just barely nipped buddy Chris in the Vette.
- Attachments
-
- BMWclubWin.jpg (230.8 KiB) Viewed 5419 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
For reference.
- Attachments
-
- RS_ND_V4_Sways_1ed adjustment.jpg (248.41 KiB) Viewed 5248 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com