Dryve Gear Cargo Bag

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.
Post Reply
Ryan @ GWR
Posts: 522
Joined: Fri Oct 17, 2014 11:37 pm

Dryve Gear Cargo Bag

Post by Ryan @ GWR »

Instructions for the Dryve Gear Cargo Bag found on our site at the link below:

https://www.good-win-racing.com/Mazda-P ... -3877.html

Step 1: Clean the trunk area.

Step 1.jpg
Step 1.jpg (387.71 KiB) Viewed 65 times
Step 2: Center bag on trunk lid.

Step 2.jpg
Step 2.jpg (269.66 KiB) Viewed 65 times
Step 3A: Open trunk, pull straps from pocket and place clips over trunk panel edges.

Step 3A.jpg
Step 3A.jpg (268.97 KiB) Viewed 65 times
Step 3B: Open trunk, pull straps from pocket and place clips below trunk panel edges.

Step 3B.jpg
Step 3B.jpg (289.17 KiB) Viewed 65 times
Step 4A: Close trunk, pull rear straps from pocket and place clips over rear trunk panel edge.

Step 4A.jpg
Step 4A.jpg (258.33 KiB) Viewed 65 times
Step 4B: With trunk open, pull rear straps from pocket and place clips inside rear interior trunk edge.

Step 4B.jpg
Step 4B.jpg (289.17 KiB) Viewed 65 times
Step 5: Make sure trunk is closed and use bag hardware to tighten each strap.

Step 5.jpg
Step 5.jpg (522.11 KiB) Viewed 65 times
Post Reply