Page 1 of 1
Glass Hardtop & MX5Cup Cage
Posted: Wed Aug 21, 2013 1:00 pm
by timw
Re: Glass Hardtop & MX5Cup Cage
Posted: Wed Aug 21, 2013 3:25 pm
by Brian
Both are in use on our NCLIGHT track toy. Hardtop does NOT include factory half inch thick rubber seal along the bottom and as a consequence it sits on the bar with gap all the way around the back of about half an inch. You can either find the factory seal or do your own. I added some foam rubber material meant to seal door edges.
Re: Glass Hardtop & MX5Cup Cage
Posted: Wed Aug 21, 2013 3:39 pm
by timw
Thanks. Am doing some preliminary planning on a potential project.
Re: Glass Hardtop & MX5Cup Cage
Posted: Wed Sep 04, 2013 10:35 pm
by timw
Are these AWR Cup cages now unobtanium like the other AWR roll bars?
Re: Glass Hardtop & MX5Cup Cage
Posted: Thu Sep 05, 2013 8:53 am
by Brian
We can still get you an AWR cage if you like. Tony is done making the bars but continues to make the full cages.
Re: Glass Hardtop & MX5Cup Cage
Posted: Wed Jan 22, 2014 2:04 pm
by AlexD859
Brian,
Does the factory latch from the soft top work with the hard top? I plan on removing the soft top entirely when I purchase a hardtop. Also can you post what swaybar end links you used for side attachment of the hardtop. Much appreciated.
Alex