New Singular MotorSports Hood Vents

Show off your lightweight high-performance wheels and see here what they look like on your Mazda before you buy.
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

New Singular MotorSports Hood Vents

Post by Brian »

Why you should vent your Miata hood? Hoods vents are a key element to improving the cooling system effectiveness. Reducing the pressure behind the radiator creates a larger differential between the front and rear of the radiator. The larger the pressure differential, the greater the airflow through your radiator. Reducing underhood pressure also cuts down on lift under the front of the car, improving downforce.
Prior to this product, we didn't have any well designed vents made for the Miata. There are very few aftermarket hoods, and most of them weigh more than the stock hood. We ve all seen the DIY vent options out there, including grafting on vents from other cars. Most of these are less than ideal and run into problems as they are not intended for Miata hoods.

Singular carefully tested their design on the Miata. They started by investigating the pressure and airflow of the stock hood and then tested a number of existing venting options. They used the best performing vent we found as a benchmark and set out to beat it with a new design from the ground up.

Singular MotorSports started with a general design based around what should work well, then tweaked and tested until they arrived at the final version you see here. The result is a louver system including gurney flaps that reduces the pressure under the hood by a staggering 50%, fits NA and NB hoods with placement tailored to each model. These louvers work in the lightweight factory aluminum hood to minimize cost and you do not have to deal with poor fitment of aftermarket hoods, and does not sacrifice hood rigidity so that even the stock hood latch can still be used.

This is a DIY installation part. That said, Singular MotorSports gave careful thought to ease of install from the beginning and you get a full vinyl cutting template specific to the NA or NB Miata. The cut template removes the guesswork from your install, just stick it on and it shows you where to cut. Also included is rubber trim that fits around the circumference of the holes, making it easy to achieve a clean and finished look.

The louvers ship flat (unbent), you bend the fins when you receive them, and the finish work is up to you. Powdercoat will have great longevity, but even simple Rustoleum flat black looks fantastic.


Reduces under-hood pressure by 50%
Specifically designed for the NA and NB Miata hood
Retains hood rigidity and the use of the stock hood latch
Increases engine cooling capabilities
Decreases lift on the front of the car
Backed by data developed through pressure and flow testing
Outperforms every hood vent option tested (by a lot)
Designed and produced in the USA


What you get:

Precision waterjet aluminum louvers
Removeable gurney flaps (can swap them on/off at the track)
Stainless steel mounting hardware
Rubber trim to cover the cut edge for a clean look
Chassis specific vinyl cut template
Attachments
DSC_9114_zpsd1e59807.jpg
DSC_9114_zpsd1e59807.jpg (30.63 KiB) Viewed 23832 times
MSMinstalled1_zps6779bf30.jpg
MSMinstalled1_zps6779bf30.jpg (60.83 KiB) Viewed 23832 times
MSMCloseup_zps4edeec99.jpg
MSMCloseup_zps4edeec99.jpg (22.95 KiB) Viewed 23832 times
NAUnderside_zps70f67e35.jpg
NAUnderside_zps70f67e35.jpg (60.3 KiB) Viewed 23832 times
NBUnderside_zpsb1940c99.jpg
NBUnderside_zpsb1940c99.jpg (45.13 KiB) Viewed 23832 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New Singular MotorSports Hood Vents

Post by Brian »

More pics!
Attachments
ShapedLouvers_zps257c45c8.jpg
ShapedLouvers_zps257c45c8.jpg (55.34 KiB) Viewed 23831 times
MSMCloseup2_zps779faa13.jpg
MSMCloseup2_zps779faa13.jpg (23.2 KiB) Viewed 23831 times
BendingFins_zpsadaa7c6d.jpg
BendingFins_zpsadaa7c6d.jpg (23.15 KiB) Viewed 23831 times
DSC_9112_zps91d40ae8.jpg
DSC_9112_zps91d40ae8.jpg (38.76 KiB) Viewed 23831 times
DSC_9115_zps0f06b021.jpg
DSC_9115_zps0f06b021.jpg (49.2 KiB) Viewed 23831 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New Singular MotorSports Hood Vents

Post by Brian »

More pics!
Attachments
hood-vents1.jpg
hood-vents1.jpg (47.83 KiB) Viewed 23830 times
hood-vents2.jpg
hood-vents2.jpg (47.38 KiB) Viewed 23830 times
hoodvents3.jpg
hoodvents3.jpg (152.2 KiB) Viewed 23830 times
hood-vents4.jpg
hood-vents4.jpg (46.77 KiB) Viewed 23830 times
Hood-vents5.jpg
Hood-vents5.jpg (34.15 KiB) Viewed 23830 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New Singular MotorSports Hood Vents

Post by Brian »

More pics, courtesy of Customer Chris Myhre
Attachments
hood-vents-A.JPG
hood-vents-A.JPG (86.88 KiB) Viewed 23805 times
Hood-vents-2.JPG
Hood-vents-2.JPG (90.25 KiB) Viewed 23805 times
hood-vents-6.JPG
hood-vents-6.JPG (115.35 KiB) Viewed 23805 times
Miata_vent-7.JPG
Miata_vent-7.JPG (73.37 KiB) Viewed 23805 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New Singular MotorSports Hood Vents

Post by Brian »

Getting lots of requests for NC application...and they are in the works!
Attachments
NC-louvers.jpg
NC-louvers.jpg (28.66 KiB) Viewed 23698 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
NaregM677
Posts: 69
Joined: Fri Jan 31, 2014 1:48 pm
Location: Pasadena, CA

Re: New Singular MotorSports Hood Vents

Post by NaregM677 »

Looks awesome! Can't wait.
2013 Miata Club "Shadowfax"
"And the road becomes my bride..."
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New Singular MotorSports Hood Vents

Post by Brian »

More installed shots...
Attachments
Louvers1.jpg
Louvers1.jpg (24.96 KiB) Viewed 23633 times
louvers2.jpg
louvers2.jpg (25.25 KiB) Viewed 23633 times
louvers3.jpg
louvers3.jpg (37.52 KiB) Viewed 23633 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New Singular MotorSports Hood Vents

Post by Brian »

More installed pics!
Attachments
Louver5.jpg
Louver5.jpg (126.47 KiB) Viewed 23632 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
skeeler
Posts: 282
Joined: Mon Mar 31, 2008 7:31 pm
Location: Ann Arbor, Michigan
Contact:

Re: New Singular MotorSports Hood Vents

Post by skeeler »

Interesting. Keep us updated on the NC fitment.
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New Singular MotorSports Hood Vents

Post by Brian »

NC hood vents now for sale on the site.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply