Page 1 of 1

NC End Links

Posted: Sat Nov 15, 2014 8:24 pm
by NaregM677
Hey guys,
I have a 2013 Miata Club with the PRHT. I recently installed Progress Technologies sway bars front/rear and I take it to the track 3 times a month. The car recently began making a strange clunky noise, mostly from the rear. I just got back from my mechanic and he suggested installing better end links. Of the ones you offer, the ones that don't have a noise disclaimer or are for a lowered car are the PowerGrid, Whiteline and Racing Beat end links. I don't know much about end links. Could you point me in the right direction? I'm looking for a durable one that leans toward better performance and communication from the car. Any help?

Re: NC End Links

Posted: Sun Nov 16, 2014 8:00 am
by StephenW571
I use the racing beat end links and no problems with stock shocks and progress lowering springs.
If i had adjustable shocks then i would probably go for the whiteline end links as these are simpler to adjust for length.

Re: NC End Links

Posted: Mon Nov 17, 2014 8:05 pm
by NaregM677
And you expect that they would work on your model with stock shocks and lowered spring AND my Bilstein shocks with the standard spring? If so, that's pretty handy.

Anyone else have a recommendation?

Re: NC End Links

Posted: Tue Nov 18, 2014 7:02 am
by Brian
Any of the ball socket style will be silent. Usually clunk like this is not issue with the links, usually it is not enough lube on the bushings for the bar and the bar is sticking and releasing....add some more lube and clean out any dirt/sand that has got in there.

Re: NC End Links

Posted: Tue Nov 18, 2014 4:33 pm
by StephenW571
Absolutely.
Like Brian says, you may just have a dry sway bush or two.