PROJECT ND: Parts Development, Testing, Measurements, DYNO

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Ryan @ GWR
Posts: 497
Joined: Fri Oct 17, 2014 11:37 pm

Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO

Post by Ryan @ GWR »

ND rear bumpstop lengths:

ND1 74mm / 2.92"
ND2 81mm / 3.19"
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO

Post by Brian »

Drain plug for Moroso ND oil pan. A torque spec of 90-100 in lbs should be sufficient on that, but the drain plug on that pan has a built in stop on the bung so it is VERY difficult to over tighten. It is also o-ringed so leaks are very rare with that style plug period... once it is made tight.

Notice that O ring in black, make sure you got that still on there when the plug goes back in.
Attachments
PlugOring.jpg
PlugOring.jpg (22.56 KiB) Viewed 5114 times
Plug.jpg
Plug.jpg (43.63 KiB) Viewed 5116 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO

Post by Brian »

Fresh Picture of our ND "X" Shock Tower Brace Courtesy Customer Bobby Covington
Attachments
XBrace.jpg
XBrace.jpg (2.07 MiB) Viewed 5092 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO

Post by Brian »

Fun day with friends at BMW Club Autocross!

I miss our old Qualcomm Stadium Days! Our local BMW Club is using a lot in Chula Vista not far from our shop. This location is convenient but super small compared to the fast long courses we enjoyed back in the day at Qualcomm. Nonetheless, grateful to have local events again with BMW CLUB, lunch is included with admission and today that was the yummy taco guy and lots of fast SCCA buddies run these events.

Working on some cool new tech rear bumpstops in our project ND.

Fun Run with another instructor going shotgun for fun:



Top Time of Day Run 31.5

BMWClubToday!.jpg
BMWClubToday!.jpg (231.83 KiB) Viewed 4928 times
XClass.jpg
XClass.jpg (323.91 KiB) Viewed 4929 times
Attachments
FastMIata.jpg
FastMIata.jpg (1.92 MiB) Viewed 4934 times
FastND.jpg
FastND.jpg (1.31 MiB) Viewed 4934 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO

Post by Brian »

Customer car with our Progress RF Springs....looks so good!
Attachments
ProgressRF.jpg
ProgressRF.jpg (653.45 KiB) Viewed 4067 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply