ND rear bumpstop lengths:
ND1 74mm / 2.92"
ND2 81mm / 3.19"
PROJECT ND: Parts Development, Testing, Measurements, DYNO
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Drain plug for Moroso ND oil pan. A torque spec of 90-100 in lbs should be sufficient on that, but the drain plug on that pan has a built in stop on the bung so it is VERY difficult to over tighten. It is also o-ringed so leaks are very rare with that style plug period... once it is made tight.
Notice that O ring in black, make sure you got that still on there when the plug goes back in.
Notice that O ring in black, make sure you got that still on there when the plug goes back in.
- Attachments
-
- PlugOring.jpg (22.56 KiB) Viewed 5172 times
-
- Plug.jpg (43.63 KiB) Viewed 5174 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Fresh Picture of our ND "X" Shock Tower Brace Courtesy Customer Bobby Covington
- Attachments
-
- XBrace.jpg (2.07 MiB) Viewed 5150 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Fun day with friends at BMW Club Autocross!
I miss our old Qualcomm Stadium Days! Our local BMW Club is using a lot in Chula Vista not far from our shop. This location is convenient but super small compared to the fast long courses we enjoyed back in the day at Qualcomm. Nonetheless, grateful to have local events again with BMW CLUB, lunch is included with admission and today that was the yummy taco guy and lots of fast SCCA buddies run these events.
Working on some cool new tech rear bumpstops in our project ND.
Fun Run with another instructor going shotgun for fun:
Top Time of Day Run 31.5
I miss our old Qualcomm Stadium Days! Our local BMW Club is using a lot in Chula Vista not far from our shop. This location is convenient but super small compared to the fast long courses we enjoyed back in the day at Qualcomm. Nonetheless, grateful to have local events again with BMW CLUB, lunch is included with admission and today that was the yummy taco guy and lots of fast SCCA buddies run these events.
Working on some cool new tech rear bumpstops in our project ND.
Fun Run with another instructor going shotgun for fun:
Top Time of Day Run 31.5
- Attachments
-
- FastMIata.jpg (1.92 MiB) Viewed 4992 times
-
- FastND.jpg (1.31 MiB) Viewed 4992 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT ND: Parts Development, Testing, Measurements, DYNO
Customer car with our Progress RF Springs....looks so good!
- Attachments
-
- ProgressRF.jpg (653.45 KiB) Viewed 4125 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com