PROJECT FIAT 124, Testing, Measurements, Dyno, etc
-
- Posts: 78
- Joined: Tue May 24, 2016 10:32 am
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
This is going to get interesting. Thanks for all the information.
2017 Meteor Gray Club
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Spring rates!
OEM Fiat 124
F) 160
R) 85
OEM MX5 (non-club model)
F) 156
R) 80
Progress Springs
F) 185
R) 115
OEM Fiat 124
F) 160
R) 85
OEM MX5 (non-club model)
F) 156
R) 80
Progress Springs
F) 185
R) 115
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
good subject being well done. please keep it up.
wally
wally
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Shop Pup "Mr. Happy" working on adding some more bark to the exhaust system..
...because he is a bark expert.
...because he is a bark expert.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Lots more fun to come!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
The Fiat has a downpipe that transitions to cross pipe...because the chassis was designed for Miata with header on right side of the car. Testing various downpipe ideas.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Is the down pipe a full 2.5" diameter? Is it close enough to things that don't like to get hot to justify a ceramic coating? Same questions for the crossover pipe.
Thanks again for sharing your development thread for the Fiat 124!
Thanks again for sharing your development thread for the Fiat 124!
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Yes....2.5
Yes....will be ceramic coated.
Pic showing inlet of stock Fiat124 Downpipe...it pinches well below 2 inches, far from ideal.
Yes....will be ceramic coated.
Pic showing inlet of stock Fiat124 Downpipe...it pinches well below 2 inches, far from ideal.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Out with factory small and pinched crosspipe in the background, in with our 2.5 inch upgrade!
This is what connects the catalytic converter on the Fiat 124 to the Midpipe and it is critical for turbo spool and flow.
This is what connects the catalytic converter on the Fiat 124 to the Midpipe and it is critical for turbo spool and flow.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
KONI SPORT Prototype Shocks for ND Miata/Fiat124 installed today, autocross testing tomorrow.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com