Konig Hypergram

[Brian]

Konig Hypergram 16x8 5x114.3 +38 Bronze
225/50R16 General G-MAX RS
Today's New Miata Wheels Picture Courtesy Customer Eric Barbara

[Brian]

Konig Hypergram 16x8 5x114.3 +38 Bronze
Today's New NC Generation MX5 Miata Wheels Picture Courtesy Customer Ian Sherwood

[Brian]

Konig Hypergram 17x8 4X100 ET45 Carbon w/ Machined Lip
Picture Courtesy of Customer Anthony Rudd

[Brian]

Today's New Miata Wheels Picture Courtesy H. Wang
Konig Hypergram 17x8 4X100 ET45 Matte Grey

[MattB310]

For my Nc guys on 17x9 and up had anyone notice tire contact being an issue with the fender to bumper mount? Or is this a non issue
Like

7D324D06-5F50-4EBA-9125-920A52CB919C.jpeg (421.09 KiB) Viewed 493 times

[Brian]

That usually means too much caster. Back down the caster to 6. WE tend to run a lot of camber and mild caster, for racing with 17x9 or 17x10 something like -3.3 camber front (-2.7 rear) and caster just 6 and zero front toe for most customers (but toe OUT for autocross customers at front) and toe in at rear for everyone.

[MattB310]

That usually means too much caster. Back down the caster to 6. WE tend to run a lot of camber and mild caster, for racing with 17x9 or 17x10 something like -3.3 camber front (-2.7 rear) and caster just 6 and zero front toe for most customers (but toe OUT for autocross customers at front) and toe in at rear for everyone.

perfect!! Im scheduled for an alignment later this wk so ill dial up the caster. Was already planing to max out front camber from my 2.2 its at

[Brian]

Today's New Miata Wheels Picture Courtesy Customer Jorden Villarreal
Konig Hypergram 17x8 4X100 Carbon w/ Machined Lip

[Brian]

Konig Hypergam 17x8 with Hankook RS4 225/45/17
Today's Fun ND Wheels Picture Courtesy Customer Charlotte Hamilton

[Brian]

Our own Project NC 08 with our Hypergram 17x8 and 235/40 Dunlop Tires.