Konig Hypergram

[Brian]

Today's New Miata Wheels Picture Courtesy Customer Mike Bezdziecki
ND3 with Konig Heliogram 17x8.5 +45 (Matte Bronze) wrapped in Toyo Proxes R1R 235/40 tires
https://www.good-win-racing.com/Mazda-P ... -3293.html

[Brian]

New Miata Wheels Picture Courtesy Customer Michael Herman

McGard Spline Drive 16 Silver Lug Nuts and Tool Set.
https://www.good-win-racing.com/Mazda-P ... -1058.html

Progress Technologies FRONT and REAR AntiSway Bar Combo!
https://www.good-win-racing.com/Mazda-P ... -1784.html

RoadsterSport MX5 ND Miata V2 Front Shock Tower 'X' Brace.
https://www.good-win-racing.com/Mazda-P ... -2789.html

Konig Hypergram 17x9 4X100 ET45 Carbon w/ Machined Lip.
https://www.good-win-racing.com/Mazda-P ... -2842.html

RoadsterSport SuperStreet.
https://www.good-win-racing.com/Mazda-P ... -1787.html

[Brian]

Konig Hypergram 15x7.5 4X100 ET35 Carbon w/ Machined Lip.
https://www.good-win-racing.com/Mazda-P ... -2729.html
Today's New Pictures Courtesy Customer Jacob Covey

[Brian]

KONIG DELIVERY today, all the favorites are back in stock!

[Brian]

Today's New Hypergram Miata Wheel Pictures Courtesy Customer Brady Butterfield
Konig Hypergram 17x8 4X100 ET45 Carbon w/ Machined Lip. Clears Brembo.
https://www.good-win-racing.com/Mazda-P ... -2730.html

Progress RF Springs
2016-2023 · RF
GOOD-WIN RACING EXCLUSIVE....GET RF HEIGHTS RIGHT!
https://www.good-win-racing.com/Mazda-P ... 847RF.html

[Brian]

More driving impressions of our Koni ClubSport Coilovers with 9/5 Springs. Wanted to to see if I could get ride quality back to something comparable to stock NC/ND. Drove my 2019 to the shop today which is on stock Club trim springs and KONI SPORT shocks set soft all around and the typical overstuff of tires we do for SCCA CS, which is 225/45-17 on 17x7. That ND2 is otherwise pretty stock with just upgraded front sway bar, we must use stock springs for SCCA CS per the rules of that class. That tire being poorly supported by the 17x7 Storm wheels we have on the car means ride is pretty plush, more so than when the car was totally stock with factory Bilsteins and stock 205/45-17 tires.

This combo of our Hypergram 16x8 with 225/50-16 Conti tires with the Koni ClubSport Coilovers on 9/5 springs and tire pressures 25psi all around and shocks half turn off soft is indeed just as plush down the freeway as my 2019, or any stock NC that I have driven. Yet with 9/5 springs and our Progress Sways on full still front and rear this NC will charge the corners much harder.

Konig Hypergram 16x8 +38 Metallic Carbon w/ Machined Lip.
https://www.good-win-racing.com/Mazda-P ... -3039.html

[Brian]

2 Konig Hypergram 15x7.5 4X100 ET35 Carbon w/ Machined Lip.
https://www.good-win-racing.com/Mazda-P ... -2729.html

2 Konig Hypergram 15x8 4X100 ET35 Carbon w/ Machined Lip.
https://www.good-win-racing.com/Mazda-P ... -2866.html

Picture Courtesy Customer CALEB ECKSTEIN

[Brian]

Konig Hypergram 15x7.5 4X100 ET35 Carbon w/ Machined Lip.
https://www.good-win-racing.com/Mazda-P ... -2729.html
Today's New Miata Wheels Picture Courtesy Customer T Pal.

[Brian]

Konig Hypergram 15x8 4X100 ET35 Race Bronze.
205/50/r15 Yokohama Advan Neova AD09's
Picture Courtesy Customer Edward Marsoun
https://www.good-win-racing.com/Mazda-P ... -2870.html

[Brian]

Konig Hypergram 15x8 4X100 ET35 Race Bronze.
https://www.good-win-racing.com/Mazda-P ... -2870.html
Pictures by Customer James Montefusco II

Customer posted to the NA Red Miata FB group and I copied it here because folks ask us all the time how to get these on NA with no fender lip roll. This customer has it setup for track use, no fender lip roll, but camber is better than -2 front and rear. 4 inches frame rail to ground front, 5 inches rear. That's good camber for track use, too much for street if doing much straight freeway driving.