Konig Dekagram - New Flow Formed Wheel!

[Brian]

Konig Dekagram 15x10 4X100 ET25 Matte Black
Konig Dekagram 15x7.5 4X100 ET35 Matte Black


Today's Fun Pictures Courtesy Customer Travis Dowell
Producer at MotorTrend Studio
ETA Sept. 22nd on MotorTrend on Demand.

[Brian]

Today's New Picture Courtesy Customer Gabriel Smith
16x8 Konig Dekagrams wrapped in Firestone Winterforce 2 205/50R16 87S.
https://www.good-win-racing.com/Mazda-P ... -2300.html

[Brian]

Konig Dekagram 16x8 4X100 ET35 Matte Black
https://www.good-win-racing.com/Mazda-P ... -2300.html

[Brian]

Today's New Miata Wheels Picture Courtesy Customer Carter Russell
Konig Dekagram 15x10 4X100 ET25 Bronze!
Details and more pics of this wheel at the link:
https://www.good-win-racing.com/Mazda-P ... -2571.html

[Brian]

Today's New Pictures Courtesy Customer Travis Harrell
Konig Dekagram 16x8 4X100 ET35 Bronze
https://www.good-win-racing.com/Mazda-P ... 2300B.html
Tires 205/50/16 Yokohama AD09.
'Feels excellent. Shaved a few pounds of unsprung weight and gained some sidewall comfort.'


Also has our RoadsterSport SuperStreet Muffler:
https://www.good-win-racing.com/Mazda-P ... -1787.html

And RoadsterSport Springs:
https://www.good-win-racing.com/Mazda-P ... 847ND.html

dekaNDredbronze.jpg (4.31 MiB) Viewed 6012 times

DekaNDbronzered.jpg (2.33 MiB) Viewed 6012 times

TravisFunExhaust.jpg (2.93 MiB) Viewed 6012 times

[Brian]

Konig Dekagram 17x8 4X100 ET45 Gloss Bronze with 235/40 tire.
https://www.good-win-racing.com/Mazda-P ... 2303B.html
Today's New Pictures Courtesy Customer Jose Lim

[Brian]

Folks ask us about 15 inch on ND all the time. We usually say no, because they don't really 'fit' the factory brakes. Nonetheless, can be done if you accept some compromises like no space for balance weights and extremely close to rear brake calipers. Must be a car with lots of lowering for lots of negative camber for any chance of getting this under the lips with 35mm offset. Copied from Customer Peter Calenda's FB post in detail:

DekagramND15s-1.jpg (536.86 KiB) Viewed 5420 times

Peter's Fitment Notes:
Wanted to share this to the group, i recently upgraded my tire set up to konig dekagram 15x9 +35 off set. they clear the brembos no problem little close on the rear, but they do clear don't use wheel weights.

As for the tires I was going to run 225/45 R15 semi slicks but got a deal on s9me hoosier R7 245/40 R15 with 3 heat cycles on them for 200$. I figured if they suck or don't work out oh well it was only 200$

So here's where the issues started to pup up
I run koni sport shocks with BBR lowering springs. Being that there a little bigger then coil overs the inside of my tire just barley rubbed the coil when the suspension was fully unloaded. So I decided to run a 3mm spacer l, I was at lime rock this past week end and was rubbing the fender and out side of the tire on the driver side rear. So we decided to take the spacer out and roll the fender with what tools we had and had no issues the rest of the day.

I think if your on a non coil over set up your going to be stuck at a 225/45 R15 unless you want to roll your fenders. The level of grip is insane I was running Michellen cup 2s in stock size. Any ways just wanted to put that out to the group since I see a lot of wheel and tire fitment questions.

[Brian]

Today's New Miata Wheels Picture Courtesy Customer Andrew Baird
Konig Dekagram 15x7.5 4X100 ET35 Matte Black
https://www.good-win-racing.com/Mazda-P ... -2298.html

[Brian]

Lick the stamp and SEND IT!
Konig Dekagram 15x10 4X100
Fun Konig Picture of the day courtesy customer Harry Ambler
More details on this wheel and more pics:
https://www.good-win-racing.com/Mazda-P ... -2421.html