RPF1 fitment question

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.

RPF1 fitment question

Postby PapaJohn » Sun Jun 09, 2019 6:28 pm

2013 MX5 with Progress springs and Bilstein shocks. I will be using 215/45/17 BFG tires. These tires are the g-Force Sport-Comp-2 tires which pretty much have a wide flat tread. Can I use the Enkel 17x8 wheels with the 45mm offset and still clear both front and rear fenders without any modifications to them. There can be a small amount of tire/body movement in turns and with two people and full gas I don't want any fender rub. Thanks
PapaJohn
 
Posts: 12
Joined: Tue Jan 09, 2018 5:38 pm

Re: RPF1 fitment question

Postby Brian » Mon Jun 10, 2019 3:10 pm

Yes, with that conservative tire size and bit of lowering from the Progress springs that proposed Enkei and 215/45 setup is plug and play. Have fun!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 8844
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA


Return to Installation Instructions

Who is online

Users browsing this forum: No registered users and 1 guest