PCV Hose not connected?

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
AndrewK636
Posts: 3
Joined: Mon Jan 17, 2022 11:47 pm

PCV Hose not connected?

Post by AndrewK636 »

Had 06 NC apart to replace Knock Sensor. What a pain!!

Got it back together and won't start. It kind of starts for a second or two, revs high and dies with a heavy breathing sound from engine. I think PCV hose got disconnected from dynamic chamber while trying to wiggle it in place.

If I blow on the breather hose from valve cover I can hear a hiss coming from PCV area.

Any tricks for getting the hose connected while matting the dynamic chamber??????

I think it would be easier to just install the intake you sell, but it says something about port matching? Any advantages with stock exhaust header and pipe? I do have Roadster Sport muffler from circa 06.
AndrewK636
Posts: 3
Joined: Mon Jan 17, 2022 11:47 pm

Re: PCV Hose not connected?

Post by AndrewK636 »

NVM...got it broken down again and out back together. Got at hose with hands from the firewall side. All good now.

Will run for a while, then decide on more power options.
Post Reply