Maverick the Shop Truck!

[JohnG595]

Is this an in house solution for front camber bolts or Eibach/SPC? Definitely doing this with the lowering springs along with rear camber upgrades.

[Brian]

This is camber control for those who go low and those who go high.

Those going lower may find they have more camber than they want. Those going higher will likely find they have less camber than they want. We found 2.5 degrees of range with these. They already existed for the Ford Escape/Bronco Sport so we figured they would work on the Maverick and we have added them to our store now that we have confirmed fitment.

EZ Cam Front Camber Correction Bolts
2022-2023
PART NUMBER: 61-3422

[JohnG595]

This is camber control for those who go low and those who go high.

Those going lower may find they have more camber than they want. Those going higher will likely find they have less camber than they want. We found 2.5 degrees of range with these. They already existed for the Ford Escape/Bronco Sport so we figured they would work on the Maverick and we have added them to our store now that we have confirmed fitment.

EZ Cam Front Camber Correction Bolts
2022-2023
PART NUMBER: 61-3422

Yeah, my rule of thumb has always been any lowering or lifting beyond 1” that I upgrade front and rear camber for most adjustment. That’s the plan here since most drop springs are beyond 1” on this truck.

Thanks for the parts link.

I know this may be a long shot, but do you have any plans to develop skid plates? I’m tempted to grab some Bronco Sport plates and modify to fit. Haven’t come across anyone yet that makes one for the Maverick with access to the oil drain plug and filter.

[Brian]

Yes, skid plates on our short list of items to look at doing.

[Brian]

Did 550 miles today in the Maverick!
It does cover ground really well for a little truck.

[Brian]

Some off road fun on coastal trails today in Bodega Bay

[Brian]

Another day of fun running up and down the coast in the Maverick.

[Brian]

Had our friends from Grassroots MotorSports Magazine drive and photoshoot this project NC today. This NC is featuring a number of new NC items that are coming this year. Super fun day of car guys running fun canyon roads, look for this machine in GRM by Summer. I spent a bunch of time on my belly in the Maverick bed shooting this Miata running down the canyon straight at my face. Never figured I would be riding in the open bed of the Maverick down a canyon road. The crew from GRM were curious enough about the Maverick and our mods to it that they wanted to drive it and take some pics of it too. So, with luck both this NC and the Maverick end up in the pages of GRM by Summer.

Konig Hypergram 17x8 +45 Metallic Carbon w/ Machined Lip
2006-2015


And the GRM crew had a 'free' brand new Porsche for the day on loan from Porsche marketing department. So naturally it needed some pics too.

Porsche1.JPG (908.55 KiB) Viewed 23486 times

[Brian]

Full size of the Maverick as Chase Truck Pic.

[Brian]

Good-Win Racing Ford Maverick Handling Package INSTALLED Pics Courtesy Customer Joshua Corwin

BEFORE and AFTER:

MaverickLoweredBeforeAfter.jpg (1010.24 KiB) Viewed 23460 times

More AFTER Lowering:

MavLoweredCombo2.jpg (528.15 KiB) Viewed 23460 times

MaverickLoweredCombo.jpg (386.56 KiB) Viewed 23460 times

Joshua added 'I am so pleased with the progressive technologies, sport spring / 3 way adj, swaybar combo.
She finally drives and rides properly.'