Page 1 of 1

Hardware for ND GWR Header to stock midpipe install

Posted: Mon Jan 09, 2023 8:02 pm
by FidelF376
Hello,

I recently bought used a GWR Header for my ND. The header included no hardware at all.

I've already ordered the RoadsterSport header to midpipe gasket.
What other hardware do I need to get to complete the installation? I'm installing to a stock midpipe.

I think the other thing I need are the nuts and bolts for the header/midpipe union. Where can I get these? Anything else I need to get?

Re: Hardware for ND GWR Header to stock midpipe install

Posted: Wed Jan 11, 2023 7:21 am
by Brian
Nothing else you really need, the stock nuts and bolts can be used again.

Re: Hardware for ND GWR Header to stock midpipe install

Posted: Wed Jan 11, 2023 8:10 am
by FidelF376
Thought so. Thanks Brian!

Re: Hardware for ND GWR Header to stock midpipe install

Posted: Wed Jan 11, 2023 10:10 am
by Brian
Sorry, first response was before Coffee. Thinking more on it, the stock flange off the stock header has the nuts welded on. That means you do need standard bolt and nut and lock washer to add the aftermarket header. Just take that used header to hardware store and get bolt size that slides through the holes easily enough.

Re: Hardware for ND GWR Header to stock midpipe install

Posted: Sun Jan 15, 2023 6:05 pm
by FidelF376
Thanks for the reply Brian! I'm at the point of connecting the GWR header to the OEM midpipe. However, I'm having trouble finding the appropiate bolts/nuts. I took the OEM header to HomeDepot and I thought I had the right ones (3/8x1 1/2) but that was not it. Do you remember what are the correct bolts/nuts to connect the GWR header to the OEM midpipe? Also, do I reuse the Ring Gasket? Does it go on the header side of the joint (before the RoadsterSport gasket) or on the midpipe side?

EDIT: Just realized that you said to bring the used GWR header and check that one, not the OEM... Damn.

Re: Hardware for ND GWR Header to stock midpipe install

Posted: Mon Jan 16, 2023 6:36 am
by njaremka