New DEI Tunnel Heat Shield for NC

Show off your lightweight high-performance wheels and see here what they look like on your Mazda before you buy.
Post Reply
Ryan @ GWR
Posts: 497
Joined: Fri Oct 17, 2014 11:37 pm

New DEI Tunnel Heat Shield for NC

Post by Ryan @ GWR »

DEI just released the finished product for the new tunnel heat shield for the NC!
This has been a long time in the making. DEI worked with an industry friend of ours Andrew T. to make this a reality. These replace the factory shield in the tunnel, which is torn up and deteriorating on many of the cars that we see pass through our shop.

They just went live on our site, part number 61-3483, and we'll have them in stock here shortly.

10950_NC_tunnel_shield_kit__77347.jpg
10950_NC_tunnel_shield_kit__77347.jpg (281.99 KiB) Viewed 4422 times
nc_andrew_tunnel2.JPG
nc_andrew_tunnel2.JPG (725.73 KiB) Viewed 4422 times
The kit comes with a 15 ft roll of DEI Cool Tape to use to seal up the edges for a nice clean finished install, as shown in the install below. And if you need more of that tape, or want to use the same stuff elsewhere on the car, we have it in a 30 ft roll on our site, part number 61-3482.

010408-CoolTape15-Left__71224.1497291680.1280.1280__99936.jpg
010408-CoolTape15-Left__71224.1497291680.1280.1280__99936.jpg (114.65 KiB) Viewed 4422 times
nc_andrew_tunnel.jpg
nc_andrew_tunnel.jpg (276.43 KiB) Viewed 4422 times
Post Reply