Ride height question for NC

v67gsr · Post by **v67gsr** » Tue Dec 05, 2006 11:40 am

My coilcover finally arrived. Now I have the question regarding ride height. I can go from 15mm to 55mm lower than stock. My question is how low any of you have tried before experiencing any scratch on the bottom panels and/or front chin.

Post by **Brian** » Tue Dec 05, 2006 11:46 am

That really depends on what conditions YOU face in your daily drive. I seem to clear most speed bumps around here even 2 inches below stock height but my driveway requires me stay closer to 1.5 inches below stock height.

v67gsr · Post by **v67gsr** » Tue Dec 05, 2006 11:58 am

Brian.

Do you happen to know the wheel ratio of NC?

Post by **Brian** » Tue Dec 05, 2006 12:04 pm

What do you mean by "wheel ratio"

v67gsr · Post by **v67gsr** » Tue Dec 05, 2006 12:10 pm

Brian wrote:What do you mean by "wheel ratio"

I should call it motion ratio.

Like the amount of wheel movement in related to shock travel.

I did some measurment a while back but I forgot them already.

Post by **Brian** » Tue Dec 05, 2006 12:15 pm

Sorry, I don't have the ratio either.

v67gsr · Post by **v67gsr** » Tue Dec 05, 2006 12:24 pm

Thanks anyway

Another question. Do you have to modify the stock shock tower brace mounting inorder to reach the adjustment knob?

I believe some say need to drill a hole.

Post by **Brian** » Tue Dec 05, 2006 12:30 pm

I simply removed it...because you would need such a hole to reach adjustment knobs on top.